How To Remove Glass Mirror Tiles From Wall

You lot are probably looking at some damage due to the glue used - all-time method is to tape an X to each mirror, move everything out of the room, roofing the floor with plastic & grabbing a few putt knives. Hopefully yous won't suspension whatever mirrors merely if you do the X should help hold them together. Starting at a top corner where you lot take admission to two sides, insert the putty knives & gently outset pulling from the walls, pushing in a little further & pulling out again - rinse & repeat a few times & yous should hopefully come away with ane mirror piece intact. Based on how that goes and how they attached them you should have a amend idea or method for the side by side one. Requite the new method a shot & adjust every bit necessary as you become downward the wall. If yous have glue still stuck to the wall - no big deal either by using the putty pocketknife or a scraper piece of work around it till you get it off. Whatsoever missing paper, etc.. only do a skim coat of drywall mud, sand & redo if necessary.

endeavor a piece of wire and kickoff at corner and pull wire down backside mirror may exist enough to cut through gum.

If you're agape of wall impairment sew or purchase some pretty drapes to hang in front of the mirrors.Hang them from ceiling to the floor.

If put upwards with the sticky tabs pull of and use white spirit to make clean of gummed function, besides useful for labels on jars.

I had thought well-nigh curtains but I really would rather have the mirrors downwards. And that would be a safety outcome equally well. The other 2 ideas are good. May endeavor them in combination. Cheers.

A on May 31, 2022

try taping one mirror, possibly a bottom one, put tarp down under It and tap the mirror with hammer. Breaking abroad the mirror will requite you an idea of how much adhesive is probably backside each mirror. Go from there and see which manner you want to take them down

Hither is another idea, merely it wont get the mirror downward. You or someone paint a mural or a post card photo on it with h2o colors. My cousin used to paint a Christmas Post Card scene on our hall entry mirror every year and information technology was beautiful. Simply a thought; otherwise, I would endeavor the wire and taping idea. Skillful Luck

• That sounds like an first-class thought. Thank you. I may effort that.

CK on May 31, 2022

I too might exist afraid of breaking them upon removal and/or wall damage. Though I besides like the idea of hanging drapes over them, I remember painting them might be a fun selection. The 'filigree work' created by the mirrors themselves would lend a fun 'texture' to the wall. Personally I'd paint them all one colour or maybe even 2 colors (very close together on the paint strip) in alternating pattern. It would give more than depth without making it look like a "quilt". Accept you thought about framing out the entire mirror? That would give the sort of 80's wall mirror look an updated look. Y'all could also simulated paint frames around each private mirror (or maybe even effectually four tiles square) for a really unique expect. This motion-picture show from Ballard Designs is what I'one thousand referring to. Information technology's pretty posh looking, I think :-)

• Ahhhh.....that looks nice. A neat idea. Cheers.

I had same trouble, but with my living room fireplace expanse. I taped the tiles with tape in 10 and used a warm iron to warm up the glue. Nonetheless wore heavy gloves and safety glasses, and they came off. We sanded what glue wouldn't come off and repainted area. Wish I had pictures to show it, but nosotros moved shortly subsequently.

I have 70s or 80s mode mirrored glass on one whole wall in my dining room. Information technology's adhered to the wall by long strips of adhesive. I learned if you heat the adhesive a bit with a blow dryer and use a putty knife, you can wiggle the putty knife all around and release the tile from the wall without damaging the wall. Some of the agglutinative may stick, but reheating the strip helps to release it from the wall. Also, wearable gloves in case the tiles suspension. I did not and ended up with some small cuts on my hands.

Source: https://www.hometalk.com/diy/repair/drywall/q-how-to-remove-12-inch-mirror-squares-from-a-wall-8707172

Share this post